60mm H Beam Production Line Hydraulic Straightening Machine 18.5kw

60mm H Beam Production Line Hydraulic Straightening Machine 18.5kw

1. Major technical Parameters

 Width of the flange: 200-800mm
 Thickness of the flange: 20-60mm
 Minimum height of the web: 350mm
 Drive motor: 18.5kw
 Maximum output torque: 34770N.m
 Linear velocity of the work piece: 7.496m/min
 Hydraulic pressure system: 11kw
 Output volume of the oil pump: 25m1/r
 Maximum system pressure: 25Mpa
 Normal working pressure: 20Mpa

2. Provide goods and compose parts

 Main frame of correcting machine: base, left-and-right frame, motor, deceleration machine, guide wheel, up roll, press roll
 Conveyor: base, 14m roller way and so on
 Electric control: electric control box
 Spare parts: switch*2, wrench*1

3. Performance

        H beam flange hydraulic straighteningmachine is used for the calibrate the flange of H beam. Through the lever principle and elastic recovery, it bends the flange of the I beam or H beam when the beam passing through the hole.

        The equipment is made up of electric motor, reductor, driving wheel correcting device, initiative hoist cylinder, former, mainframe, stand, hydraulic system, front/back elevating roller rack of pendulum type and the electric control system. The correcting mechanism is compact, solid and easy to operate.

4. Technical files

 Using manual of the machine (Include electrical schematic)
 Shipping list
 The certification of the machine
 The basis of drawing of the machine