Gantry Submerged Arc Welding Equipment For H Beam Production Line

Gantry Submerged Arc Welding Equipment For H Beam Production Line

1. Technical Parameters

Height of the wing board: 200-800 mm
Thickness of the wing board: 6-40 mm
Height of the former: 200-1500 mm
Thickness of the former: 6-32 mm
Length of the usable work piece: 4000-15000 mm
Welding speed: 240-1500 mm/min
To-and-fro stoke of the welding arm: 800mm
Welding position: fillet welding in the flat position
Size of the usable welding wire: 3.2-5 mm
Flux recovery capacity: 100 kg * 2

2. Performance

        MZG1000*2 Gantry welding machine is specially designed for the welding of H beam. It realized the combination of welding control and trolley control and can be operated easily. Driven by alternating current converter, stable speed, digital display of the linearity speed, good reliability, floating type tracing to guarantee that the welding torch targeting at the welding seam accurately. The power line for the submerged arc welding can move on the portal frame to shorten the length of the control cable and the welding cable as far as possible to quicken the response, reduce the pressure and stabilize the welding current.

3.Compose parts

Mail frame: gantry, travel unit, carriage wire-feeding tube and attachments etc.
Welding arm and its carriage: 2 sets of welding arm elevating unit arm travel unit, carriage and its attachments
Flux recovery system: 100kg flux recovery unit flux separating barrel flux hopper flux recovery and convey tube.
Welding system: 2 sets of MZG1000 welding machine.
Welding control board and welding gun.
Spare parts: 3 piece of 5A fuse, bottoms*2, 2 pieces of 10A fuse, 8 pieces of wire guide.

4. Technical files

Using manual (Include electrical schematic).
Shipping list.
Certification of the machine.
Drawing of the machine.
Hydraulic using manual, inverter using manual, submerged arc welding using manual.